Our most durable wood glue, this Ultimate formula is 100% waterproof and incredibly strong, but still easily cleans up with water. It is great for outdoor applications where temperatures or moisture might be a concern, as well as interior projects that could benefit from the extended working time and high strength.
DIRECTIONS:
1. Clean and dry surfaces to be bonded.
2. Shake well before use.
3. Apply glue generously to the surface.
4. Join and clamp for 20-30 minutes. Parts should fit tightly.
5. Excess glue can be removed with a clean, wet cloth or scraped off after glue dries.
6. Allow bond to dry for 24 hours.
7. Remove applicator tip to clean out glue build up.
NOTE: Application temperature should be at or above 50°F. Before finishing, sand surfaces to minimize glue exposure.
Not recommended for structural or load bearing applications and not for continuous submersion or below-waterline use.
Applications Temperature: 50 – 75°F (10 – 24°C), best at room temperature
Service Temperature: 0 – 150°F (-17 – 66°C)
Outdoor: Yes
Moisture Resistant: Type I Waterproof
Paintable: Yes
Sandable: Yes
Stainable: Yes
Expands when cured: No
Technical Standards: ANSI/HPVA Type I
Storage Tips: Close cap after use. Store at room temperature. If glue thickens or separates, shake vigorously until restored to original consistency. STORE AWAY FROM CHILDREN AND ANIMALS.
Gap Filling: No
PRODUCT FEATURES
- WATERPROOF: Passes the ANSI/HPVA Type 1 water-resistance.
- EXTENDED WORKING/OPEN ASSEMBLY TIME: Up to 15 minutes.
- REQUIRES ONLY 20-30 MINUTES OF CLAMP TIME: Fully cured in 24 hours.
- LOW APPLICATION TEMP: As low as 50°F
- INCREDIBLY STRONG & DURABLE: Withstands exposure to water, sun, and extreme temperatures.
- DRIES NATURAL COLOR: No Foam
لاصق الأخشب الأكثر متانة . هذه التركيبة النهائية مقاومة للماء بنسبة 100% و قوية بشكل لا يصدق مع كونها تنظف بسهولة باستخدام الماء رائع للتطبيقات الخارجية حيث ارتفاع درجات الحرارة و مستويات الرطوبة.و كذلك المشروعات الداخلية لزيادة وقت العمل و منح مشروعاتك القوة العالية.
تعليمات الإستخدام : 1- قم بتنظيف السطح و تجفيفه جيدا.
2- رج المنتج جيدا قبل الإستخدام. 3- ضع كمية مناسبة من الغراء. 4- قم بتثبيت مكان اللصق جيدا مدة 20-30 دقيقة.
5- يمكن إزالة الغراء الزائد بقطعة قماش مبللة نشفة أو قم بكشط الغراء بعد الجفاف . 6- لزيادة صلابة اللصق يترك 24 ساعة. 7- نظف رأس عبوة الغراء جيدا بعد الإستخدام.
ملحوظة : درجة الحرارة لتطبيق الغراء لابد أن تكون أكبر من 50 درجة فهرنهايت.
قبل الإنتهاء قم بسنفرة الأسطح لتقليل بروز الغراء. لا ينصح به للهياكل الخرسانية أو خطوط المياه.
درججة حرارة التطبيق : 50 درجة فهرنهايت. الأفضل الإستخدام في درجة حرارة الغرفة.
للإستخدام الخارجي : نعم مقاوم للماء : نعم قابل للسنفرة: نعم يتمدد عند الجفاف : لا
ظروف التخزين : في درجة حرارة الغرفة.
في حالة كثافة المنتج أو فصله يرج عدة مرات لإستعادة صيغته الأصلية.
يخزن بعيدا عن وصل الأطفال و الحيوانات.
يملأ الفجوات: لا
مميزات المنتج :
مقاوم للماء
وقت التشغبل : يصل إلى 15 دقيقة.
يتطلب للجفاف 20-30 دقيقة فقط و الجفاف النهائي بعد 24 ساعة.
انخفاض درجة حرارة التطبيق إلى 50 درجة فهرنهايت.
قوي بشكل لا يصدق و دائم : يقاوم التعرض للحرارة و الماء و درجات الحرارة القصوى.
يجف اللون طبيعيا بدون فقاعات على السطح.
لإزالة غراء خشب الغوريلا من اليدين ، اغسله بالصابون الدافئ والماء.
تكلفة الشحن على أساس الوزن. ما عليك سوى إضافة المنتجات إلى عربة التسوق الخاصة بك واستخدام حاسبة الشحن لمعرفة سعر الشحن. نريدك أن تكون راضيًا بنسبة 100٪ عن مشترياتك. يمكن إرجاع المنتجات أو استبدالها في غضون 30 يومًا من التسليم
1. General
Subject to stock availability. We try to maintain accurate stock counts on our website but from time-to-time, there may be a stock discrepancy and we will not be able to fulfill all your items at the time of purchase. In this instance, we will fulfill the available products to you, and contact you about whether you would prefer to await restocking of the back ordered item or if you would prefer for us to process a refund.
2. Shipping Costs
Shipping costs are calculated during checkout based on the order value of the items in the order.
This price will be the final price for the shipping cost to the customer.