ثوره فى الطلاءات المؤقته فهو أساس أبيض لجعل أي دهان قابل للنزع بسهولة
ABOUT
هو الثورة التالية في الطلاءات المؤقتة من خلال جعل أي طلاء بخاخ
قابل للإزالة. إنه مقاوم للبنزين ، ويمنحك تحكمًا تامًا بمئات الألوان الفريدة واللمعان والتشطيبات لسيارتك. قم برش Peelable Primer على سطح نظيف ثم قم بتغطيته فوق أي طلاء بخاخ أيًا كان أسلوبك
سهلة الإزالة عن طريق التقشير
سهل التطبيق على الأسطح المطلية كالمعادن والبلاستيك والزجاج واكثر
آمن للغسيل اليدوي أو من خلال غسيل السيارات الأوتوماتيكي
يوصى بالإزالة في غضون 6 أشهر
Rust-Oleum® Peel Coat® Peelable Primer is the next revolution in temporary coatings by making any Rust-Oleum spray paint removable. It’s gasoline resistant, and puts you in total control with hundreds of unique colors, sheens and finishes to customize your vehicle. Spray Peelable Primer on a clean surface then top coat it with any Rust-Oleum spray paint from high gloss lacquers to pearl metallics to hammered finishes or whatever your style.
- Makes any Rust-Oleum spray paint removable
- Simple to remove by peeling the film
- Easy to apply on OEM painted surfaces, metal, plastic, glass and more
- Safe to wash by hand or through an automatic car wash
- Recommended removal within 6 months
How to use
اغسل السطح المراد جيدًا وتأكد من إزالة أي شمع أو زيت أو شحم من على السطح.
تأكد من أن السطح جاف تمامًا قبل تطبيق
قم بتغطية وإخفاء أي مناطق لا يجب دهنها بشريط لاصق أو أغطية بلاستيكية ، إلخ.
امسك العلبة 8-12 بوصة من السطح ورشها ببطء وثبات في حركة ذهابًا وإيابًا ، متداخلة قليلاً مع كل خط رش، حتى يتم تغطية المنطقة بالكامل.
ضع 3 طبقات أو أكثر ، وانتظر 2-5 دقائق بين الطبقات. يتم تعريف الطبقة على أنها تغطي المنطقة بأكملها من مرة واحدة.
اذا مرت اكثر من 20 دقيقة بين الطبقات اتركه حتى يجف تمامًا ، ثم انزع ، وابدأ من جديد.
اترك حتى يجف لمدة 4 ساعات قبل وضع الطبقة العلوية بدهان رش
فورا بعد وضع الطبقة النهائية من ، ابدأ في إزالة الشريط اللاصق والغطاء العازل للمناطق الغير مرغوب في دهانها لضمان حواف نظيفة.
بمجرد أن يجف طلاء لمدة 4 ساعات على الأقل ، يمكنك الطلاء باستخدام أي طلاء بخاخ
قم بإخفاء المناطق التي لا تريد طلاءها تمامًا..
ملاحظة: لا تستخدم مع دهانات الرش ذات اساس مائى
-لتقشير الطبقة الخارجية ، افركها ببطء على طول إحدى الحواف حتى تبدأ في التقشر للخلف واعمل ببطء من الحواف .. والطبقة العلوية من الدهان الذي فوقه ستتم إزالتهم كغشاء واحد وطبقة واحدة.
للحصول على أفضل النتائج ، قم بإزالته في غضون 6 أشهر.
- Wash vehicles thoroughly and ensure you’ve removed any wax, oil or grease from the surface.
- Make sure the surface is completely dry before applying Peelable Primer.
- Cover and mask off any areas that should not be painted with tape, plastic sheeting, etc.
- Hold the can 8-12” from the surface and spray slowly and steadily in a back-and-forth motion, slightly overlapping each stroke, until the entire area is covered.
- Apply 3 or more coats, waiting 2-5 minutes between coats. A coat is defined as covering the entire area once.
- If Peelable Primer has dried for more than 20 minutes between coats, allow it to fully dry, peel off, and start over.
- Allow Peelable Primer to dry for 4 hours before applying top coat with Rust-Oleum branded spray paint.
- Immediately after applying your final coat of Peelable Primer, begin removing tape and masking to ensure clean edges.
- Once the Peelable Primer coating has dried for at least 4 hours, you can top coat with any Rust-Olem spray paint. Thoroughly mask off the areas you do not want to paint.
- Follow label directions when using Rust-Oleum spray paint and refer to each label for appropriate dry times and instructions. Note: Do not use with water-based spray paints.
- To peel the coating off, slowly rub along one edge until it begins to peel back and work slowly from the edges. Peelable Primer and your top coat will remove as one film.
- For best results, remove Peelable Primer and its top coat within 6 months.